9/8/2019- We are working on putting a new payment system in place. PayPal has busted us for policy violations and we need to find a new source to handle our transactions. We have a short term solution for sales until we have a new system. Use the Contact Us tab at the bottom of each page and we will work to get your parts to you. My apologies for the inconvenience.
9/8/2019-We have four 8” Mpx Handgaurds that are available now. Next batch of handguars run the week of the 26th. If you want to be on the waiting list, which is growing, use the contact us tab at the bottom of the page.
9/8/2019- AR9 1 3/4” handguard news… We have 4 pcs 15” AVAILABLE now and another 42 pcs 15” and 13.5” early September. our new AR-9 specific 1 3/4” diameter handguards are in production now.
9/8/2019- MPx 1 3/4” handguard news… We are working through getting the material organized with the carbon Fiber manufacturer now for the 1 3/4” diameter MPX handgaurd. As we make progress I will update on availability. I EXPECT SOME TEST PARTS COMPLETED BY late september. FIRST OnE GOING TO JEFF SNOPE FOR T&E.
AVAILABLE NOW- CHECK OUT OUR COMPLETE .223/5.56 UPPER ASSEMBLIES PAGE, AVAILABLE NOW! WE WILL HAVE THREE COMPLETE UPPER ASSEMBLIES BASED ON BLACK HOLE’S SIGNATURE 16” “3 GUN NATION” .223 WYLDE BARRELS, TWO IN PROCESS AND ONE AVAIALABLE NOW. THESE WILL BE BUILT UP WITH THE SAME QUALITY PARTS WE USE IN OUR OTHER COMPLETE UPPERS ASSEMBLIES.
9/8/2019 We have only 9 pc of the 15" MPX handguards coming this week but they are all spoken for. The 15" Handguards are for you 16" barreled guys and gals...ALSO FOR THE NEW SIG MPX PCC. I have two customers using these on the 14.5" barrel using the stock MPX flash hider. One has 12K plus rounds through it since the handguard was installed and all it does to the inside of the handguard is soot it up. There is so little energy at the end of that 16 " barrel with 9mm it's no issue (I would not try this with comp that has limited ports for that may create an issue).
We now have 4 pcs 8" MPX Handguard and 4 pcs BLEMS available now!! We have 0 pcs 12.25" MPX Handguard in stock. There are 0 pcs 10.25" MPX Handguards, more coming soon…
Our 6" MPX handguard is now available with 3 left in stock, we have had numerous requests for this part!
For those who have asked, we have a supply of MPX Pic rail that will line up with your MPX upper receiver rail. We received the first of our proprietary M-Lok mount for our MPX Pic rail section for those of you interested in transition sights. They are available now.
9/8/2019- We have 0 pc 15” AR15/9 and 0 pc 13.5" AR15-AR9 Competition handguards in stock now. We will begin a new batch of both sizes soon.
We have 1 pc 10.5" and 1 pc 7" AR15/AR9 Competition handguards available for your SBR toys, Email for prices please since these are not stocked items.
Complete 15" kit is 7.7 ounces, darn light and darn stiff. Our first 13.5" version for use with 14.5" barrels has been mounted and is in the field currently being used in competition on an AR15 (you can see a pic of this 13.5" handguard on the top of the handgaurd page). We received the first of our proprietary M-Lok mount for our AR Pic rail section for those of you interested in transition sights.
We have 0 pcs AR-15 ICGW upper receivers for sale now. We are building them up with V7 parts so the upper receiver is ready to install your Barrel. They come with the V7 Diamond pattern Forward Assist, V7 Aluminum Port Door and Hinge and the V7 Mil Spec Titanium Barrel Nut in Black. These are the same parts we put on our Lightweight AR builds. We also have stripped versions of our ICGW AR-15 upper receivers available now.
8/4/2018- WE HAVE OUR NEW 13.5”AND 15” AR-10 COMPETITION CARBON FIBER HANDGUARDS IN STOCK NOW. Barrel Nuts have mil-spec Type 3 hardcoat. 2.160 OD and 2.00 ID with great .080" thick wall stiffness. M-lok cuts all around just like our AR15/AR9 and MPX Competition Handguards. The 2.00 ID is large enough to accommodate a bull barrel and an SLR or Superlative adjustable gas block. 17" 15" and 13.5" are the first parts, then others along with custom lengths also. 17” is for 18” barrels, 15” is for 16” barrels and the 13.5” is for 14.5” barrels. This will leave a little less than 1/2” of barrel showing before the muzzle brake. NOTE: You will need the Precision Reflex DPMS AR10 barrel nut wrench or similar tool to tighten barrel nut.